Lifepro VERDURE - Operating Instructions; Control Panel Operation; Remote Control Operation; Operating Modes Explained

10 Verdure User Manual Lifepro Recovery + Fitness Collection 11
*Speed cannot be manually adjusted for preset
programs.
*Speed cannot be manually
adjusted for preset programs.
OPERATING INSTRUCTIONS
USING THE CONTROL PANEL TO OPERATE THE VERDURE
1. Power Button: Press to turn the Verdure on/off. When powered on, the
display panel will light up and the unit will enter standby mode.
2. Program Button: In standby mode, press the button to choose one the
three preset programs (P1, P2, P3) or manual workout mode (HR) .
3. Start/Stop Button: Press the button to begin the select preset program
(P1-P3) or manual workout (HR). Press the button at any time during the
workout to stop exercising.
4. Increase/Decrease Speed Buttons*: Press the buttons to increase or
decrease the speed, from level 1-30. You may adjust the speed before or
after a manual workout begins.
5. Speed Window: Shows the current speed level.
6. Infrared Receiver: Infrared receiver for remote control. For best results
point the remote directly at the receiver from no more than 6 feet away.
7. Time/Program Window: In standby mode, window shows which program/
mode is selected: preset programs, P1, P2, P3, or manual mode, HR.
During exercise, window shows the remaining time in the current preset
program or manual mode workout.
8. Increase/Decrease Time Button: Press the buttons to set a workout
time, from 1-30 minutes, in one-minute increments. Time may be adjusted
before or after the workout begins.
USING THE REMOTE CONTROL TO
OPERATE THE VERDURE
1. Start/Stop Button: Press to start the
selected preset program (P1-P3) or
manual mode workout (HR). Press the
button at any time during the workout to
stop exercising.
2. Program Button: Press the button to
choose one of the three preset programs
(P1, P2, P3) or to choose manual mode
workout (HR).
3. Set Speed Buttons*: Press the buttons
to increase or decrease the speed, from
level 1-30. You may adjust the speed
before or after a manual workout begins.
4. Set Time Buttons: Press the buttons to
increase or decrease the time duration
for your workout. Set time in one-minute
increments, from 1-30 minutes. Time
may be adjusted before or after the
workout begins.
MODES
Standby Mode: The Verdure is powered ON, but no program is selected.
Program Mode: Choose from preset workout programs: P1-P3.
Manual Mode: Create a custom workout with manually adjusted workout
duration and speed.
PROGRAM
SPEED–
TIME–
START
STOP
SPEED+
TIME+
TIME/PRG
SPEED
SPEED
START/STOPPROGRAMPOWER
TIME
4
57 6
8
321
1
3
2
3
4
4