5
2. Product Features And Specifications
This alarm detects particles of combustion using photoelectric technology. This smoke alarm has an expected
service life of ten years under normal conditions. We recommend that you should replace after 10 years from
installation date to ensure normal operation.
Product Features and Specifications:
• MODEL 6000: Powered by 240VAC (50Hz, 10 mA max, 4mA standby) hardwire with 9V replaceable battery
backup
• MODEL 6000RL: Powered by 240VAC (50Hz, 10 mA max, 4mA standby) hardwire with built-in recharge-
able battery backup
• Temperature: Operating Range: 0 °C to 40 °C
• Humidity: Operating range: up to 93% RH non-condensing
• Audible Alarm: 85+ dBA at 3m @ 3.0 to 3.5 KHz pulsing alarm
• Smoke Sensor: Photoelectric
• Smoke Alarm HUSH®
Control
• Storage and Transport Conditions: -20° C to +60° C, 5-95%RH (non-condensing)
• Interconnectable up to 24 units
• Insect mesh protection over sensor.
• Quick slide base plate for easy installation
• Low battery hush for 8 hours.
• Initiating alarm memory feature.
• Chamber fault monitoring
• Approved to AS3786:2014 Australian Standard
To Next Page
Loading...
