WARNING:
• While the meter is connecting to PC, it will be unable to perform a
blood glucose / β-ketone test.
DOWNLOADING RESULTS ONTO
A COMPUTER
Data Transmission Via Cable
You can use your meter with a strip port cable and the
Healthcare Software System to view test results with HCT levels
on your personal computer. To learn more about the Healthcare
Software System or to obtain a strip port cable separately,
please contact the local customer services or place of purchase
for assistance.
1. Obtaining the required cable and installing the software
To download Healthcare Software System, please visit
LifeSmart’s website: mylifesmart.net.au.
2. Connecting to a personal computer
Connect the strip port cable to a cable port on your computer. With
the meter switched off, connect the other end of the strip port cable to
the meter data port. “PC” will appear on the meter display, indicating
that the meter is in communication mode.
3. Data transmission
To transmit data, follow the instructions provided with the
software. Results will be transmitted with the data and time.
Remove the cable and the meter will automatically switch off.
To Next Page
Loading...
