The UA-774 has several modes available to fit your blood pressure monitor-
ing needs.
Normal Measurement with Readings Stored in Memory
Press the START 1 or START 2 button. Your blood pressure is measured and
the reading is stored into memory. Each START button can store up to 30
readings in memory.
Recalling Previous Measurements
To recall previous measurements in memory, press and hold the START 1 or
START 2 button. Release the button after you see the first reading recalled
from memory. The previous measurements are displayed from most recent to
oldest.
Clearing Memory
Remove batteries to clear memory. Insert batteries again to resume blood
pressure measurements.
Taking a Measurement without Reading Stored in Memory
(Guest Mode)
This mode can be used when there is a third person taking measurements or
when storing readings in memory is not desired. Press both the START 1 and
START 2 buttons at the same time. A reading will be taken, but not stored
into memory.
TAKING YOUR BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-726-9966
E-6