E-6
LifeSource Health Line (Toll-Free): 1-888-726-9966
Adjusting the Built-in Clock
The UA-853 Automatic Blood Pressure Monitor has a built-in clock that gives
you the time and date and can tell you when a blood pressure reading stored
in memory was taken. We recommend that you adjust the clock prior to use.
To adjust the clock, follow these simple steps:
1. Press and hold the AM button until the digits start blinking.
2. Select the year using the PM button.
Press the AM button to set the current year and move to month/day
selection. The date can be set anywhere between the years 2006 and 2056.
3. Select the month using the PM button.
Press the AM button to set the current month and move to day selection.
4. Select the day using the PM button.
Press the AM button to set the current day and move to hour/minute
selection.
5. Select the hour using the PM button.
Press the AM button to set the current hour and move to minute selection.
6. Select the minute using the PM button.
Press the AM button to set the current minute and activate the clock.
7. The Clock is now set.
TAKING YOUR BLOOD PRESSURE
To Next Page
Loading...
Need help?
General
