AM-HLTMC-OM
Rev AA January 2018
1. At the end of charge (green LED on or flashing), press on the <EQUALIZE> button. The
equalize button can also be pressed any time during the charge and an equalize charge will be
started after charging is complete.
NOTE: When an equalize is manually started, the output current will be set to the
value saved in the charger configuration.
2. The start of the equalization charge is indicated by the message EQUAL. During the
equalization charge, the charger displays the output current and alternating, the battery voltage,
voltage per cell, remaining time.
L2010 24-36-48V US11
3. The battery will be available when the green LED comes back on and the display shows
AVAIL.
4. The battery is now ready for use. If the battery remains plugged in and refresh charge has
been enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF button
before unplugging the battery.
Automatic start
If an equalization day has been programmed in Charger configurations the equalization charge
will start automatically on the programmed day of the week after charging is complete.
Note: The factory default Ionic Equalize is 4 hours on Sunday at 00 hour.
The battery will be available when the green LED comes back on and the display shows AVAIL.
The battery is now ready for use. If the battery remains plugged in and refresh charge has been
enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF button before
unplugging the battery.
To Next Page
Loading...