To Next PageTo Next Page
Need help?Do you have a question about the Lifetech LTC1 and is the answer not in the manual?
Part number, serial number, battery type, and number of cells.
AC voltage, ampere-hour capacity.
AC Amps, Hertz, and Phase.
DC Volts and Max DC Current.
Explains the CEC certification logo.
Recommends optimal locations for trouble-free service.
Details mounting requirements for wall cabinet chargers.
Guides on connecting input power, AC, plug polarity.
Emphasizes the importance of grounding for electrical shock prevention.
Introduces microprocessor control and battery adaptation.
Describes the process when a battery is connected.
Explains how charging current is determined and displayed.
Details requirements for charging batteries in series.
Describes the unit for battery parameter monitoring.
Defines various charging profiles like Ionic, Evolution, etc.
Profile for batteries in cold storage applications.
Balances electrolyte densities after normal charging.
Profile for opportunity charging, start rate, equalize req.
Inhibits charging during a specified time window.
Maintenance charging to retain battery charge.
Charger compatibility with battery voltages.
Automatic battery recognition by microprocessor.
Explains BBWC™ adapter for data transfer.
Displays charger operation info and menus.
Describes UP, DOWN, LEFT, RIGHT, ENTER/STOP&START buttons.
Explains RED, YELLOW, GREEN, BLUE indicator lights.
For downloading memos and uploading software.
Shows the main menu interface.
How to access main menu and navigate.
Lists available menu functions (Logs, Settings, USB, Password, Charger).
Displays details of the last 200 charge cycles.
Steps to view memorized charge cycle data.
Describes data fields like S/N, Capacity, U batt, etc.
Displays charger's internal counters and status.
Explains Charge, Complete, Partial, DF1-5, TH, DFC status types.
Configures date, time, language, region, and display.
Stores, downloads, and updates using USB stick.
Procedure for entering password for service menus.
Shows charger configuration and output current.
Details like Profile, Temperature, Capacity, Max Current.
Shows total output current and module voltages.
Details for IBat and MOD1-MOD6 modules.
Details default factory settings for charger configuration.
Sets up various charging profiles and battery parameters.
Selection of appropriate charging profiles for applications.
Configures automatic or manual start and delays.
Configures daily charge and block out time windows.
Configures float mode, current, and voltage.
Sets charge percentage based on discharge depth.
Sets battery rest time and refresh charging mode.
Configures NB Cells, Cap Man/Auto, Capacity, Temp.
LM/EB option and DC cable length/gauge selection.
Configures manual current, time, delay, and frequency.
Tests operation and configures network protocol/baud rate.
Shows information when the charger is idle.
Displays charger type, profile, and firmware version.
Shows current system time and date.
Prompts user to connect the battery.
Charger starts automatically or via button.
Charging begins after a programmed delay.
Shows time remaining before programmed charging starts.
How BBWC™ affects charging start and data acquisition.
Alternating display of voltage, current, temp, Ah, etc.
Explains specific data points like Charge Voltage, Current, Battery S/N.
Indicates completion and availability.
Explains manual or automatic equalization start.
How to manually start equalization.
Automatic equalization based on programming.
Shows fault codes on the display.
Lists faults (DF1-DF5, TH) with cause and solution.
Lists more faults (BAT TEMP, MOD TH, MOD DFC, DF ID, Battery Balance, High temp).
Warns of dangerous voltages and need for qualified personnel.
Recommends keeping connections clean and cleaning the unit.
Identifies the AC and DC cable connections.
Identifies module slots and DC/Backplane fuses.
Lists part numbers for components and accessories.
Provides detailed physical dimensions for mounting.
Lists part numbers with AC/DC input/output specs.
Lists part numbers and specs compliant with CEC.
Log for recording changes to factory settings.
Log for recording service dates and descriptions.
General| Brand | Lifetech |
|---|---|
| Model | LTC1 |
| Category | Battery Charger |
| Language | English |
