Lifetime 6418 - Floor and Corner Assembly; Assemble the Shed Floor; Assemble Front Corner

9
2
Assemble Floor
2.1: Lay Outer Floor Panel (109) fl at on the ground. Hold
the other Outer Floor Panel (109) at an angle (as shown)
and fi t tabs into slots and lay Floor Panel fl at.
1.
CAUTION
Sharp objects may damage your
floor. If resting sharp, heavy
objects on your shed fl oor, place a
block of wood between the sharp
object and fl oor.
109
109
3.1: Fold Left Front Corner Panel (105). Fit tabs of panel into the front left corner (while facing
shed) of your fl oor. Place a wood block under fl oor panel, directly under fi rst tab, then pull down
on Corner Panel until tab snaps into place. Move block under the next tab and repeat.
3
105
Place Wood Block (BD) directly under
the tab you are inserting. Snap tabs
into place one at a time.
Assemble Front Corner