Need help?Do you have a question about the Lifetime 71281 and is the answer not in the manual?
General| Brand | Lifetime |
|---|---|
| Model | 71281 |
| Category | Fitness Equipment |
| Language | English |
Manufacturer's commitment to customer privacy and data protection.
Instructions for contacting customer service for questions or missing parts.
Warnings and precautions for safe assembly, including ladder use and adult supervision.
Safety advice for site preparation, like checking for underground utilities.
Instructions to separate hardware and inventory all parts before starting assembly.
Guidance on testing bolt fitment and preparing holes for assembly.
Precautions for safely handling the glass backboard during assembly.
Guidelines for proper handling and maintenance of the backboard during regular use.
Emergency procedures to follow if the glass backboard breaks.
Steps for safely detaching the backboard from the system.
Emphasizes the need for three adults for safe and proper assembly.
Explains the meaning of icons used in the assembly instructions for tools, notes, cautions, and warnings.
Details the process of preparing the ground, including digging a hole for the pole.
Instructions for digging a round hole 24 inches deep and 18 inches in diameter for the pole.
Information about an alternative ground sleeve for pole installation.
Instructions to mark 14.5 inches from the dimpled end of the Bottom Pole (ALE).
Guide on mixing and preparing concrete for pole installation.
Steps for inserting the Bottom Pole into the center cement up to the marked height.
A note regarding the impact of pole burial depth on rim height.
Instructions to ensure the pole slots are parallel to the playing surface for proper alignment.
Guidance on inserting rebar into the Bottom Pole and checking pole alignment.
Warning about the required time for concrete to set before continuing assembly.
Instructions for pouring and tamping the remaining concrete into the Bottom Pole.
Critical warning regarding the extended curing time for concrete, especially in humid conditions.
Lists the specific hardware required for assembling the pole sections.
Lists the parts needed for assembling the pole sections.
Lists the tools required for assembling the pole sections.
Step-by-step instructions for attaching the Pole Bracket to the Top Pole using bolts and spacers.
Instructions for placing the Height Sticker onto the Top Pole for height adjustment reference.
Guidance on aligning and connecting the Top Pole over the Middle Pole using a screw and washer.
Instructions on how to firmly seat the pole sections using a wood block and hammer/mallet.
Critical warning about the necessity of properly seating the poles to prevent separation during use.
Instructions for inserting a self-tapping screw to secure the seated pole sections.
Lists all hardware components required for attaching the backboard to the rim.
Lists the parts needed to assemble the backboard and rim components.
Lists the tools required for assembling the backboard and rim.
Instructions for sliding the U-Bolt through the Left and Right Backboard Brackets.
Steps to connect backboard brackets using hex bolts, spacers, and a centerlock nut.
Instructions for attaching tap bolts through flat and rubber washers to the rim.
Steps for connecting the Rim and Plastic Guard to the Backboard using a U-Bolt and hardware.
Instructions to secure the Spring Retainer Plate and Compression Springs to the U-Bolt.
Guidance on sliding carriage bolts into the crimped slots of each backboard channel.
Steps to bend and secure the backboard brackets to the backboard channels using nuts.
Instructions for placing and securing corner frame pads to the backboard with self-tapping screws.
Instructions for placing and securing the center frame pad to the backboard with self-tapping screws.
Lists the hardware required for connecting the backboard assembly to the pole.
Lists the parts needed for attaching the backboard assembly to the pole.
Lists the tools required for attaching the backboard assembly to the pole.
Instructions for connecting short extension arms to backboard brackets using bolts, spacers, and nuts.
Instructions for connecting long extension arms to backboard brackets using bolts, spacers, and nuts.
Steps to align and secure extension arms to the Top and Middle Poles using bolts, spacers, and nuts.
Lists the hardware components required for assembling the handle mechanism.
Lists the parts needed for assembling the handle mechanism.
Lists the tools required for assembling the handle mechanism.
Instructions for placing bellows through the gas spring and securing with zip ties.
Steps for attaching the gas spring to the spring bracket using a metal pin.
Instructions for inserting a cotter pin through the metal pin and bending the metal pin.
Steps for positioning the trigger inside the handle and securing it with hardware.
Instructions for securing the handle assembly to the Top Pole, including placement of spacers.
Steps for inserting the release pin through the gas spring and into the trigger channels.
Instructions for positioning and securing rear lifter arms between the handle and trigger.
Steps to connect rear lifter arms to long extension arms using bolts, spacers, and nuts.
Warning about the weight capacity of the handle mechanism and potential damage from overloading.
Instructions for applying grease from the grease packet onto the release pin.
Lists the hardware components needed for the final assembly steps.
Lists the parts needed for the final assembly steps.
Lists the tools required for the final assembly steps.
Instructions for aligning and connecting the Middle Pole over the Bottom Pole with a screw and washer.
Warning about using extreme caution on ladders during assembly steps.
Instructions for seating the poles using a wood block and hammer, emphasizing the need for wood protection.
Critical warning about the necessity of properly seating the poles to prevent separation during use.
Steps to secure the Middle and Bottom Poles together and insert the Pole Cap onto the Top Pole.
Instructions for attaching the net to the rim of the basketball hoop.
Instruction to tear off the protective cover from the assembled unit.
Detailed instructions on how to adjust the basketball hoop height using the handle and trigger.
Guidelines for regularly checking nuts, bolts, parts for wear, and warning stickers.
Procedures for checking, cleaning, and painting areas with rust or chipped paint.
Critical warning to immediately replace the pole if rust penetrates through it.
Comprehensive warnings and rules for safe operation of the basketball system.
Advice on monthly checks for corrosion and repainting metal parts.
Guidelines for inspecting equipment before use and adhering to usage limits.
Warnings against using the system for lifting, climbing, or wearing jewelry.
Details the terms and conditions of the 6-year limited factory warranty.
Lists conditions and actions that are not covered by the warranty.
Instructions on how to report product defects and make warranty claims.
Information on how to purchase accessories and other Lifetime products online or by phone.
To Next Page
