TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9
SEC
1
In order to seat the Pole Sections, strike each end of the Pole Assembly very hard five to six times on a piece of scrap
wood or cardboard.
SEC
1.3
ATTENTION: THIS STEP CANNOT BE REVERSED!
WARNING
The Poles must be seated together! Poles must
be struck on a hard surface fi ve to six times!
Failure to seat the Poles correctly could allow the
Poles to separate during use, which could lead
to serious personal injuries or property damage.
WARNING
Do not hit your feet with the Pole Sections, as
serious injury could occur.
NO HARDWARE REQUIRED FOR THIS SECTION
Scrap Wood
To Next Page
Loading...
Need help?
General
