LIGHT MY BRICKS Downtown Diner Lighting Kit User Manual

Incorrectly inserting the connector can can result in
bent pins inside the port or possible overheating of
the expansion board when connected.
Connecting cable connectors to Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing
up, ensure the side of the connector with the wires exposed is facing
down. If a plug won’t t easily into a port connector, don’t force it.
Doing so will damage the plug and the connector.

LIGHT MY BRICKS Downtown Diner Lighting Kit Specifications

General

Brand	LIGHT MY BRICKS
Model	Downtown Diner Lighting Kit
Category	Lighting Equipment
Language	English