ActiveCount100 samples periodically for a user-specified number of cycles
and for a user-specified period until it reaches the user-specified volume at
100 liters per minute.
Periodic mode is useful when monitoring a process over longer periods, e.g.,
manufacturing a batch or lot of food, cosmetics or drugs.
In the example below, select ten cycles over two hours and 1,000 liters of air.
ActiveCount100 determines ten one-minute sampling cycles are needed over
two hours.
1,000 liters ÷ 100 liters/minute = 10 minutes
Pause between cycles. ActiveCount100 calculates the number of minutes to
pause between ten one-minute samples over two hours, or 12.22 minutes.
To Next Page
Loading...