Lighthouse ActiveCount100 - Status LED Indicator

Lighthouse ActiveCount100 Operating Manual
248083444-1 Rev 2 P a g e 18 of 40
Status LED Indicates Sampling Status
Status LED color and blink rate: The following table describes ActiveCount100 LED status.
Status
Color
Blink
Idle
Off
Off
Sampling
Blue
Solid
Delay/Pause
Green
Solid
Flow Error
Red
Blinking
Writing to USB
White
Solid
Service/Calibration Required
Yellow
Solid
White LED Indicates Writing To USB Flash Drive: Do not remove USB flash drive
and do not power off ActiveCount100 while LED is white and downloads are in
progress.