Lighthouse ActiveCount100 - Appendix A: Database Files; Databases in Comma-Delimited Files; Location Database; User Database

Lighthouse ActiveCount100 Operating Manual
248083444-1 Rev 2 P a g e 36 of 40
Appendix A: Database Files
Databases in Comma-Delimited Files
ActiveCount100 stores data in comma-delimited files on a USB flash drive in folder:
/ActiveCount100_<serial-number>/
where <serial-number> is the ActiveCount100 serial number. To display the serial number, see
Section Settings.
08/05/2015 15:02:14,LOC012,6,0.10,0,0,0,0,None,Good,Good,None
08/05/2015 15:02:36,LOC013,6,0.10,0,0,0,0,None,Good,Good,None
08/05/2015 15:02:56,LOC014,6,0.10,0,0,0,0,None,Good,Good,None
08/05/2015 15:04:57,LOC015,6,0.10,0,0,0,0,None,Good,Good,None
08/05/2015 15:05:19,LOC016,6,0.10,0,0,0,0,None,Good,Good,None
Location Database
Locations in CSV File: ActiveCount100 stores locations in the following file:
/Active Count 100_<serial-number>/aclocations.csv
A sample location file follows:
Location
“LOC001”
“LOC002”
“LOC003”
“ROOM AC 1”
“ROOM AC 2”
“TEST LAB A”
“TEST LAB B”
“TEST LAB C”
. . .
User Database
Users in CSV File: ActiveCount100 stores users in the following file:
/Active Count 100_<serial-number>/acusers.csv
A sample user file follows:
User
“USER001”
“USER002”
“A Jackson”
“L Abrams”