Lighthouse ActiveCount100 - Page 25

Lighthouse ActiveCount100 Operating Manual
248083444-1 Rev 2 P a g e 25 of 40
The following table describes status icons.
Icon
Status Indicator
Description
1000L
Target
Sampling Volume
Target flow volume.
Good flow
or
Flow error
Flow status while sampling.
If a flow error condition persists, contact
Lighthouse Service and Support. See Section
Technical Specifications for contact
information.
Device status flag
Possible device error, e.g., flow error,
calibration due, etc. To display the device
status, press SETTINGS button and Status
menu item.
The sampling database stores these errors in
CSV files. See subsection Sampling databases
in Appendix A, Database files.
If this condition persists, contact Lighthouse
Service and Support. See Section Technical
Specifications for contact information.
USB flash drive
USB flash drive inserted into rear USB port.
Power adapter
connected
Power adapter plugged in and charging
battery.
Battery
Current battery level.