9
DEUTSCH ENGLISH
PAN: Range 0 - 255
Tilt: Range 0 - 255
Focus: Range 0 - 255
Color: Range 0 - 255
Gobo: Range 0 - 255
Prism: Range 0 - 255
Frost: Range 0 - 255
Strobe: Range 0 - 255
Pan Invert: Invert the PAN movement
Tilt Invert: Invert the TILT movement
Rectify enable: Enables or disables automatic position correction
Pan Offset: Moves the spotlight to the PAN home position
Tilt Offset: Sets the spotlight to the TILT home position
Lamp on when: The „Lamp On“ mode includes 3 modes: Power on, after reset and manual
Factory Setting: All settings are reset to the factory settings
Under this menu subsection you can see the currently installed software as well as reset the DMX data
to ‚0‘ (DMXClr) and reset the device (SysRst).
Test Mode
Adjust the Spotlight Parameters
Device Status
Model VECTOR BSW 10R
Lamp Osram SIRIUS HRI 280 Watt
Channel mode 16/24 DMX512 channel
Pan scan 540° (16 Bit) Electric correction
Tilt scan 270° (16 Bit) Electric correction
Motor 2-phase engines
Colour wheel 13 colours
Gobos Gobo wheel 1: 13 static Gobos + open
Gobo wheel 2: 9 rotating Gobos Ø=14,7mm + open
Effect wheel 1 rotating eight face prism (circular)
1 rotating six face prism (linear)
Dimmer mechanical, 0-100%
Strobe Macro
Lens motorised zoom 3.8° - 20° & linear focus
Power Input 100-240V, 50/60Hz
Power Dissipation 420 Watt
Protection systems Over heat protection, IP20 classified
Power supply AC/DC, magnetic ballast
Dimensions 523 x 337 x 570mm
Weight 20 Kg
Technical Data
To Next Page
Loading...
