How to fix a Lightning Audio Amplifier that does not turn on?
If your Lightning Audio Amplifier doesn't turn on, it might be due to voltage issues. Check the alternator, battery, fuse, and wiring to ensure the B+ or REM is between 10.5 and 15.5 volts. Repair as necessary.
Why is there engine noise coming from my Lightning Audio FF150.2?
If your Lightning Audio Amplifier experiences engine noise, it's likely that noise is interfering with the signal cables. Try re-routing the signal cables away from high current sources.
What to do if my Lightning Audio FF150.2 has a turn-on pop?
If you're experiencing a turn-on pop with your Lightning Audio Amplifier, a voltage spike from the source unit might be entering the amplifier’s input. If pops are eliminated with no input signal to the amplifier, connect a turn-on module to the REM terminal.
Crucial safety warning about high sound pressure levels and potential hearing loss.
Details tools, planning, and rules for safe and proper installation.
Importance of checking vehicle battery and charging system capacity for amplifier load.
Step-by-step guide and precautions for connecting power, ground, and signal wires.
Instructions on how to contact customer service and obtain a Return Authorization (RA) number.
General| Channels | 2 |
|---|---|
| RMS Power @ 4 Ohms | 75W x 2 |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >90dB |
| Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0dB - 12dB @ 45Hz |
To Next Page