What to do if my Lightning Audio B3.200.2 Amplifier does not turn on?
If your Lightning Audio Amplifier doesn't turn on, the issue might be with the voltage. Ensure the B+ or REM is between 10.5 and 15.5 volts. Check the alternator, battery, fuse, and wiring, and repair if needed.
Explains WARNING and CAUTION symbols and provides critical safety advice for installation.
Details the various inputs, controls, and connections available on the amplifier models.
Lists tools and general advice for a successful amplifier installation.
Discusses optimal and recommended mounting positions for the amplifier.
Provides guidelines for mounting the amplifier in the passenger compartment.
Explains the impact of the amplifier on the vehicle's electrical system and charging.
Details the process of connecting power, ground, and remote wires for the amplifier.
Explains how to connect speakers to the amplifier, including polarity and impedance.
Explains the function, types, and application of passive crossover circuits.
Guides on setting the amplifier's gain and crossover frequency for optimal sound.
Lists common amplifier symptoms, their causes, and recommended solutions.
Details technical specifications for both B3.200.2 and B3.300.4 models.
Outlines warranty terms, exclusions, and procedures for obtaining service and returns.
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >90dB |
| Crossover Frequency | 50Hz - 250Hz |
| Crossover Type | Variable Low-Pass |
| Bass Boost | 0 to +12dB |
To Next Page