Need help?Do you have a question about the Lightning Audio S2.500 and is the answer not in the manual?
Specifications for the Strike S2.200 amplifier, including power rating, input sensitivity, and chassis size.
Specifications for the Strike S2.250 amplifier, detailing power, input sensitivity, and chassis dimensions.
Specifications for the Strike S2.300 amplifier, covering power output, input sensitivity, and chassis size.
Specifications for the Strike S2.500 amplifier, including power ratings, input sensitivity, and chassis dimensions.
Guidance on mounting the amplifier vertically or on the trunk floor for optimal cooling.
Recommendations for mounting in the passenger compartment, emphasizing air gap for cooling.
Advises against mounting the amplifier in the engine compartment due to warranty void and heat.
General| Channels | 2 |
|---|---|
| RMS Power @ 4 Ohms | 125W x 2 |
| RMS Power @ 2 Ohms | 250W x 2 |
| Bridged RMS Power @ 4 Ohms | 500W x 1 |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >90dB |
| Input Sensitivity | 250mV - 2.5V |
| Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0-12dB |
| Fuse Rating | 30A |
| Power Output | 500W |
To Next Page