LightSpeed Technologies Zulu - Lightspeed Zulu Auto MusicMute; Connecting Wired Auxiliary Devices to Zulu

Auto MusicMute
Auto MusicMute is turned on or o by the
bottom-mostcontrollerbutton.WithAuto
MusicMute on and when radio communications
are detected, the volume of auxiliary devices will
be reduced by 80 percent.
To enable Auto MusicMute, turn on the feature,
plug into your intercom and talk into the headset
microphone while playing music over a wired
device; see Wired Auxiliary Devices, on page 9. If
enabled, your auxiliary music will decrease when
you start to talk.
Note: Auto MusicMute does not aect cell phone
calls.
9
Wired Auxiliary Devices
Zulu’s wired auxiliary input allows you to connect
to cell phones and to most audio devices. To
connect a music player to Zulu’s auxiliary input
jack, use the cord provided.
To adjust the volume on a device connected to
Zulu’s auxiliary input jack, use the controls on the
device itself.
Using Your Zulu Headset