EasyManua.ls Logo

LightSpeed Technologies Zulu - Zulu Battery Installation

LightSpeed Technologies Zulu
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C. Position the microphone 1/8 inch from your
mouth. Speak into the microphone side labeled
“talk which is marked at the microphone base.
Battery Installation
The standard Zulu, Zulu:CD and Zulu:C battery–
powered headsets require two AA batteries
(included).Usealkalinebatteriesforbest
performance.
A. Open the controller battery/DIP switch door
by either pressing down on the circle icon or
by pulling open the door along the notched
edges. Insert two AA batteries with the
correct polarity positioning.
B. TheLEDashesGREENwhen
charged batteries are in use and
the power is on.
C. When batteries begin to run
low the power LED ashes
RED. If the LED ashes RED
during ight the headset
will continue to operate.
Install new batteries
as soon as possible at
any indication of low
batteries.
Battery/DIP switch door
5
Getting Started

Related product manuals