LightSpeed Technologies Zulu - Lightspeed Zulu Bluetooth Features; Lightspeed Zulu Bluetooth Mode ON and OFF

14
Your cell phone should now be paired and ready
for continued use with Zulu.
When you turn on the Zulu Bluetooth mode it will
connect to the most recently paired device. Most
Bluetooth cell phones connect to Zulu automatically.
If that doesn’t happen it may be necessary to use
the cell phone menu of found devices to signify
Lightspeed-V###(numbersmayvary).
Bluetooth Features
Depending on the Bluetooth prole of the phone,
you can use Zulu’s Bluetooth buttons to perform
several functions. Some typical functions are:
• PresstheBluetoothbuttononceforvoice
dialing (if supported by your phone).
• PresstheBluetoothbuttononcetoanswer
the phone when it rings.
• PresstheBluetoothbuttononceto
disconnect from a call.
• PressandholdtheBluetoothbuttonfortwo
seconds to redial the last number called.
• UsetheBluetoothvolumebuttons(Zulu’s+
and – buttons) to adjust the volume.
Bluetooth Mode—ON and OFF
ON: With Zulu turned ON, press and hold the
Bluetooth button; see page 7, until you hear
a high tone and the Bluetooth indicator LED
ashesthreeBLUEpulses.Forrsttimepairing
see instructions on page 13.
Bluetooth Devices