11
Using Your Zulu Headset
Zulu DIP Switch and Their Recommended Use
DIP switch
Stereo/Mono
OFF position
Stereo
ON position
Mono—
Factory setting
Recommendations
Aects audio from the panel only and should
be set to Mono in most cases. Set to Stereo
only if you are using a stereo panel. If your
audio panel produces a mono signal but the
switch is set to Stereo, you will hear audio
communications in only one ear.
Leave o Leave set to OFF
Test mode; for factory use only.
Continued on next page.
To Next Page
Loading...
