Ligier JS SO - Identification and Keys

16
1. 6 - IDENTIFICATION AND KEYS
Vehicle identification
Each car can be identied in two
different ways:
The serial number is stamped
onto the front oor of he vehicle;
in front of the passenger's seat.
(photo 1).
The engine specications are
shown on a plate xed to the front
of the engine block.
Manufacturer's plate with the
serial number etched onto it.
This is located under the bonnet,
riveted onto the right headlight
cover next to the screen wash
bottle (photo 2). Push up the engine
soundproong cover to have
access to it.
In the event of any claim or order
for spare parts, always give the
chassis number.
Keys (photo 3)
The vehicle is delivered with a set
of keys including:
2 door and ignition keys
(including one with remote control
locking, if the vehicle is tted with
it);
2 keys for opening the fuel tank;
1 bar coded label to be
retained.
1.6 - IDENTIFICATION AND KEYS
Photo 1
Photo 3
Photo 2