EasyManua.ls Logo

Ligier JS SO - Specific Functionning of a Vehicle Assembled with a Revolution (492 DCI) Engine

Ligier JS SO
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
2.3 - FONCTIONNEMENT SPECIFIQUE DU
MOTEUR REVOLUTION 492 DCI
A vehicle assembled with the Revolution
(492 DCI) engine has originally a particularity
of use : the parking assitance called EASY
PARKING.
The system is like the driving of a vehicle
with an automatic gearbox.
The EASY PARKING system get activated
each time the lever is handled in any
sense.
2.3 - SPECIFIC FUNCTIONNING OF
A VEHICLE ASSEMBLED WITH A
REVOLUTION (492 DCI) ENGINE
Vehicle started, in slow motion, the driver presses on the brake pedal and then select a
sense of motion with the lever : when releasing the brake pedal (without pressing on the
accelerator pedal), the vehicle while slowly accelerate and will stay at a speed of 7km/h. This
conguration will help the parking in any sense of motion.
Vehicle in use, the driver releases the accelerator pedal (the topology of the road has no
incidence) without pressing on the brake pedal : the engine brake will decrease the engine
rpm untill the speed is around 7 km/h.
ATTENTION : when the vehicle is in EASY PARKING way, moving at 7km/h at the
starting or after deceleration, a long press on the brake pedal will immobilize the
vehicle but will not desactivate the EASY PARKING : the releasing of the brake pedal
will make going forward the way of motion handled with the lever inverter.
To desactivate the EASY PARKING mode, do one of the 3 operations mentionned
hereafter:
- pull out the handbrake lever
- put the inverter lever at neutral
- open a door
2.3.1. - EASY PARKING
2.3.2. - SECURITY
If the vehicle does a start stop with a door opened or if a door is opened during the use, the
engine power will decrease voluntarily.