Do you have a question about the Lilytech ZL-7850A and is the answer not in the manual?
Operating Temperature | -10°C to 60°C |
---|---|
Material | ABS plastic |
Resolution | 0.1°C |
Input Type | NTC sensor |
Output Type | Relay |
Display | LED |
Communication | RS485 |
Temperature Probe | NTC (-50~110℃) Sensor wire 200cm(L) (include the probe) |
Accuracy | ±1℃ (-50~70℃) |
Output Contact Capacity | 10A/250V AC |
Instructions for setting temperature and humidity values on the controller.
Guide to accessing and modifying various device parameters.
Details on how the controller manages heating and cooling based on room temperature.
Explanation of the controller's humidification and dehumidification operations.
Information on the automatic egg turning feature, including timing and turning.
Description of the timer-based fan operation for air exhaustion.
How the controller alerts users to temperature or humidity deviations and sensor failures.
Details on sensor calibration and the controller's response to sensor malfunctions.
Instructions for locking and unlocking the controller's keypad.
Procedure to reset all device parameters to their original factory defaults.