What to do if no relay noise is heard from control box on Linak Controller?
If no relay noise is heard from the control box of your Linak Controller, the hand control might be defective, requiring it to be sent for repair.
General| Type | Control Box |
|---|---|
| Output Voltage | 24 VDC |
| Number of channels | 2 |
| Compatibility | Linak actuators |
| Design | Compact |
| Approvals | IEC 60601-1 |
| IP Rating | IPX6 |
| Protection class | Class I |
| Operating temperature | +10°C to +40°C |
| Duty Cycle | 10% (2 minutes operation followed by 18 minutes rest) |
Details precautions and responsibilities for handling ESDS devices to prevent damage from electrostatic discharge.
Provides specific instructions and torque recommendations for mounting actuators, control boxes, cables, accessories, and controls.
Details the usage, warnings, and recommendations specific to the LA20 Inline actuator.
Covers specifications, usage, warnings, recommendations, and cable mounting for LA22 and LA23 actuator series.
Provides usage details, recommendations, and mounting instructions for the LA27 actuator, including Quick Release function.
Details specifications, usage, recommendations, and features like Reed-switch and end-stop circuits for LA28 series.
Covers usage, recommendations, and specific features for LA29, LA30, LA31, and LA32 actuators.
Explains mechanical/electrical splines, quick release, safety nut, and provides warnings for LA34 actuator.
Details usage, recommendations, warnings, and mounting instructions for LA40 actuator series.
Covers usage, recommendations, warnings, and self-locking ability for LA43 actuator series.
Details usage, feedback specifications, and mounting instructions for LA44 actuator series.
Details CA30/CA40 control box features, usage, LED indicators, mounting instructions, cable management, and battery operation.
Covers CB6 and CB6 OBMe control box features, system connection, usage, and operational modes.
Details CB6P2, CB6S, and CB7 control box features, compatibility, battery operation, and precautions.
Provides information on CB8A, CB8-T, CB9, and CB9 Basic control boxes, including features and compatibility.
Covers specifications, features, and warnings for CB12, CB14, CB16, and CB20 control boxes.
Details features, LED indicators, mounting, cable management, and recommendations for CO41, CO61, CO65, and CO71 control boxes.
Covers HB20, HB30, HB40, and HB50 hand controls, including design, usage, compatibility, and warnings.
Details HB60, HB70, HB80, and HD80 hand controls, including design, usage, recommendations, and warnings.
Details BA21 Li-Ion battery features, usage, LED functionality, buzzer, mounting, deep discharge protection, transportation, and safety.
To Next Page
