What to do if there is no motor sound or movement of piston rod in Linak Controller?
If there's no motor sound or piston rod movement in your Linak Controller, first ensure the actuator is properly connected to the control box. A blown fuse in the control box could also be the cause, requiring a fuse replacement. Finally, a damaged cable could be the reason; in this case, the actuator should be sent for repair.
Why power indicator does not light up on Linak Controller?
If the power indicator on your Linak Controller doesn't light up, start by ensuring it's connected to the mains. If it is, check the fuse; replace it if the system allows external fuse replacement. A defective power cable could also be the issue; if the cable is exchangeable, try a new one. If not, or if the control box is defective, the unit needs repair.
How to fix motor that runs too slowly on Linak Controller?
If the motor on your Linak Controller runs too slowly or lacks full force, the issue might be an insufficient power supply; try increasing it. Alternatively, a voltage drop in the cable could be the cause, necessitating a thicker cable.
Why Linak Controller control box is completely dead on battery?
If the control box of your Linak Controller is completely dead on battery and there's no relay clicking, the battery might be completely flat; try charging it. If charging doesn't help, the battery may be defective and needs replacement.
What to do if actuator does not run on battery, but relay clicking can be heard on Linak Controller?
If the actuator doesn't run on battery, but relay clicking can be heard on your Linak Controller, ensure the actuator plug is properly pushed into the control box. If that's not the issue, the actuator might be defective and needs replacement.
Why are the control box relays clicking on Linak Controller?
If the control box relays are clicking on your Linak Controller, the actuator may be defective, requiring replacement. Alternatively, the control box itself could be defective and needs to be replaced.
How to fix motor run with quick release malfunction on Linak Controller?
If the motor runs but the quick release doesn't function or is noisy on your Linak Controller, it could be because the declutching arm turns less than approximately 75 °C. In this case, adjust the cable.
What to do if piston rod will only move inwards on Linak Controller?
If the piston rod will only move inwards and not outwards on your Linak Controller, it's possible the safety nut has operated. In this situation, send the actuator for repair.
Why actuator cannot lift full load on Linak Controller?
If the actuator cannot lift a full load on your Linak Controller, it may be due to a worn clutch or a damaged motor. In either case, send the actuator for repair.
What to do if motor runs but spindle does not move on Linak Controller?
If the motor runs but the spindle does not move on your Linak Controller, it is likely that the gear wheel or spindle is damaged, requiring the actuator to be sent for repair.
General| Power Supply | 24 V DC |
|---|---|
| Output voltage | 24 V DC |
| Ambient temperature | +5°C to +40°C |
| Protection class | Class II |
| Duty cycle | 10% |
| Approvals | EN 60601-1 |
| Design | Compact |
Guidelines for handling and mounting electrostatic discharge sensitive devices (ESDS) and customer responsibilities.
Provides instructions and torque specifications for mounting actuators, control boxes, cables, and accessories.
Step-by-step guide on how to connect LINAK actuators, hand controls, and mains cable to the control box.
Information, warnings, recommendations, and safety features for LINAK lithium-ion batteries.
Lists common symptoms, possible causes, and actions for troubleshooting actuators and lifting columns.
Provides guidance for diagnosing and resolving issues with electronic components.
Details of the LA20 Inline actuator, including features, usage, warnings, and recommendations.
Description of the LA22 actuator, suitable for industrial, agricultural, and rehabilitation products.
Information on the LA23 actuator, highlighting its compact design and high lifting force.
Details on the LA23 actuator for MEDLINE and CARELINE applications, including warnings and compatibility.
Information on the LA23 Intelligent Control actuator, its usage, and warnings.
Details of the LA27 actuator, designed for medical applications with a robust construction.
Overview of the LA28 actuator, a quiet and powerful system actuator for furniture and medical applications.
Specifications for the LA28 Compact actuator, suitable for healthcare and industrial applications.
Information on the LA29 HOMELINE actuator, designed for domestic applications and self-lifting recliners.
Details on the LA30 actuator, a small yet powerful option for various applications including satellite dishes.
Information on the LA31 actuator, a compact, quiet, and powerful option for hospital and nursing home beds.
Details of the LA32 actuator with a ball screw spindle for outstanding performance in various applications.
Information on the technologically advanced LA34 actuator, offering high push force and safety options.
Overview of the LA40 HOMELINE actuator, known for low noise and powerful performance.
Details of the LA40 actuator for MEDLINE and CARELINE applications, available in various versions.
Information on the LA43 actuator, offering powerful 8,000N force for safe patient handling.
Details on the LA43 Intelligent Control actuator for simple system configurations.
Information on the LA44 actuator, providing powerful 10,000N and 12,000N versions for safe patient handling.
Details on the LA44 Intelligent Control actuator for simple system configurations.
Description of CA30 and CA40 control boxes, part of a new platform for care and rehab industry.
Details of the CB6 control box, developed for LA27/LA40 actuators in the care and rehab industry.
Overview of the CB6 OBMe control box, part of LINAK OpenBus™ product range for flexible solutions.
Information on the CB6P2 platform, offering optimized solutions for existing analogue input systems.
Details of the CB6S control box, part of LINAK OpenBus™ product range for flexible solutions.
Description of the CB7 control box, small and compact for LA31 actuators in recliner applications.
Overview of the CB8A battery powered control box for mains-free operation of beds, chairs, tables.
Details of the CB8-T control box for LINAK A/S actuators and handsets, operating up to 2 actuators.
To Next Page
