Page 13 of 192
Attention should be paid to the following:
• All detachable connections between components must be locked by the cable locking mechanism - when applicable.
• All cables must be mounted in such a way that they are not trapped or exposed to tension or sharp objects when the application is
moved in different directions.
1. System description:
Usage/type of applications:
LINAK
®
actuators, lifting columns and electronics have been developed for use in all places where a linear movement is required.
LINAK products can for example be used for:
• Adjustment of beds
• Patient hoists within the care and hospital sector
• Adjustment of dentist chairs/gynaecological chairs
• Etc.
Recommendation
It is recommended to have options like quick release, manual lowering or similar built into the system in case of power loss or system failure
or if movement of the system is critical. After service it is recommended to test the system for correct functionality before it is put back into
operation.
LINAK
control box
LINAK hand control
LINAK actuators or lifting columns
The principles of a LINAK system are as follows:
To Next Page
Loading...
Need help?
General
