Lincoln Electric POWER MIGTM 200 IM693 User Manual

POWER MIG
™
200
OPERATOR’S MANUAL
IM693
June, 2002
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machine Code Numbers
10564
For use with machine Code Numbers
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Date of Purchase:
Serial Number:
Code Number:
Model:
Where Purchased:
Copyright © 2001 Lincoln Global Inc.

Lincoln Electric POWER MIGTM 200 IM693 Specifications

General

Brand	Lincoln Electric
Model	POWER MIGTM 200 IM693
Category	Welding System
Language	English

Summary

Safety

General Safety Warnings

Electrical Safety

Addresses risks of electric shock from live parts and equipment.

Arc Radiation and Fumes

Fire and Explosion Prevention

Electrically Powered Equipment Safety

Specifies safety requirements for electrical installation and operation.

Installation

Technical Specifications

Installation Safety

Outlines critical safety measures before and during installation.

Initial Setup Procedures

Gun and Gas System Setup

Operation

Controls and Adjustments

Explains the function of controls, wire drive rolls, and conversion parts.

Welding Procedures

Guides on starting, feeding wire, making welds, and setting pressure.

System Protections

Details fan control, voltage variations, and overload protection mechanisms.

Maintenance

Maintenance Safety

Essential safety precautions for performing maintenance tasks.

Component Replacement and Installation

Troubleshooting

Guide to Troubleshooting

Output Problems

Addresses issues related to machine output and weld quality.

Wire Feed Problems

Gas Flow Issues