Lincoln Electric SP-170T IM794 User Manual

SP-170T
OPERATOR’S MANUAL
IM794
April, 2006
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machine Code Numbers
10981
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2006 Lincoln Global Inc.

Lincoln Electric SP-170T IM794 Specifications

General

Type	MIG Welder
Input Phase	Single Phase
Input Frequency	60 Hz
Wire Feed Speed Range	50 - 500 IPM
Process	MIG (GMAW), Flux-Cored (FCAW)
Output Amperage Range	30 - 170 Amps
Input Current @ Rated Output	20A
Welding Thickness	Up to 1/4 inch
Wire Diameter	0.035 in.