Need help?Do you have a question about the Lincoln Electric SPEEDTEC 505SP BR and is the answer not in the manual?
General| Output Current Range | 20-500 A |
|---|---|
| Input Phase | 3 |
| Rated Output | 500A/39V/60% |
| Duty Cycle | 60% |
| Welding Processes | MIG |
| Wire Feed Speed Range | 1.0-25.0 m/min |
| Wire Diameter Range | 0.6-1.6 mm |
Covers fundamental safety rules, electrical hazards, and power connection.
Addresses EMF, optical radiation, fumes, arc rays, and fire risks.
Details risks associated with hot materials and gas cylinders.
Describes the machine's capabilities and included items.
Provides crucial instructions for setting up and operating the machine safely.
Describes the main power switch and status lights for system feedback.
Details the overload indicator and the optional user interface panel.
Identifies connection points for welding cables and accessories.
Instructions for connecting the power lead and managing fuses.
Details on connecting the water cooler and setting the input voltage.
Instructions for connecting welding cables and the user interface.
Step-by-step guide to connect the User Interface.
Explains the internal protection systems against overload and overheating.
Guidelines for safely transporting and lifting the welding machine.
Describes daily, routine, and periodic maintenance tasks.
Outlines Lincoln Electric's policy for customer support and advice.
Instructions for disposing of electrical equipment according to WEEE directive.
Guidance on identifying and obtaining spare parts and finding service centers.
Points to where the electrical schematic can be found.
To Next Page