Lincoln Electric VANTAGE 500 DEUTZ IM805 User Manual

April, 2004
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and
built with safety in mind.
However, your overall safety
can be increased by proper
installation . . . and thoughtful
operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT.
Most
importantly, think before you
act and be careful.
OPERATOR’S MANUAL
Copyright© 2004 Lincoln Global Inc.
• World’s Leader in Welding and Cutting Products •
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 USA Tel: 216.481.8100 Fax: 216.486.1751 Web Site: www.lincolnelectric.com
IM805
For use with machines having Code Numbers: 10995
Vantage 500 DEUTZ

Lincoln Electric VANTAGE 500 DEUTZ IM805 Specifications

General

Type	Engine Driven Welder
Fuel Type	Diesel
Engine Speed	1800 RPM
Welding Processes	Stick, TIG, MIG, Flux-Cored, Gouging
Engine	DEUTZ IM805
Output Range	50-500A DC
Rated Output (DC)	500A/40V/100%
Rated Output (Duty Cycle)	100%
Max Open Circuit Voltage	80V
Engine Power	48 hp
AC Generator Output	12 kW