A
Ann SmithSep 9, 2025
What to do if the Lincoln Electric Motorcycle Accessories filter remains dark after welding?
- EElizabeth RiosSep 9, 2025
If the filter remains dark, the delay setting is likely too high. Adjust it to the required level.
To Next PageTo Next PageWhat to do if the Lincoln Electric Motorcycle Accessories filter remains dark after welding?
If the filter remains dark, the delay setting is likely too high. Adjust it to the required level.
What to do if the Lincoln Electric Motorcycle Accessories filter is darkening without arc being struck?
If the filter darkens without an arc, the sensitivity is probably set too high. Adjust the sensitivity to the required level.
How to see clearly through my Lincoln Electric Motorcycle Accessories filter?
If it's difficult to see, the front cover lens may be dirty and needs cleaning or replacing. Also, the cartridge might be dirty. Clean the Auto-Darkening cartridge with soapy water solution and a soft cloth.
General| Optical Clarity | 1/1/1/1 |
|---|---|
| Shade Range | 5-13 |
| Light State | 3 |
| Switching Speed | 1/25, 000 sec |
| Number of Arc Sensors | 4 |
| TIG Amp Rating | 2 Amps |
| UV Protection | Yes |
| IR Protection | Yes |
| Weight | 21 oz |
| Operating Temperature | 14°F to 131°F (-10°C to 55°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Standards | ANSI Z87.1, CSA |
| Power Source | Solar Cells with Replaceable Batteries |
| Material | Polycarbonate |
| Lens Shade | Variable |
Details on protecting eyes and skin from harmful arc rays during welding operations.
Information on the health risks associated with welding fumes and gases, and ventilation requirements.
Guidance on adjusting headgear tightness, crown, tilt, and fore/aft positions for optimal fit.
Instructions for adjusting shade levels using the shade range switch and dual scale dial.
How to use the test button to preview shade selection and its return to light state.
Details on adjusting the sensitivity knob for optimal performance in varying light conditions.
Explanation of the delay time knob for controlling the transition from dark to light state.
Information on the ADF cartridge's power source, including battery and solar assist.
