Power Lumbar
MEMORY FUNCTION
The memory control, located on the instrument panel,
allows automatic positioning of the driver seat, power
mirrors and power tilt/telescopic steering column (if
equipped) to two programmable positions.
Programming a Memory Position
Note: A memory position may be programmed at any time.
• To program position 1, move the memory features to the desired
positions using the associated controls. Press and hold button 1 for at
least two seconds. A chime will sound confirming that a memory
position has been set.
• To program position 2, repeat the previous procedure using button 2.
Recalling a Memory Position
A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in position P or N if the ignition is on.
Press the desired memory control to recall a memory position.
2
1
Seats 135
2013 MKX (mkx)
Owners Guide gf, 2nd Printing
USA (fus)
To Next Page
Loading...
Need help?
General
