Models 85622, 85628, 85626, 85637 Non-Metallic-REV1007 Page 1
CE
1/2" NPT(Internal)
1" NPT(External)
0 to 14 gallons per minute
(0 to 52 liters per minute)
No-lube, no-stall design
Up to .125 in. (3mm)
100 psi or 231 ft. of water
(7 Kg/cm
2
or 70 meters)
.026 Gallon / .098 liter
Operating temperature limitations are as follows:
Models
85622, 85623,
85626, 85637
½" Non-Metallic
Air-Operated
Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
Santoprene
®
: Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance. 275°F -40°F
135°C -40°C
Virgin PTFE: Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals, 220°F -35°F
turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily 104°C -37°C
liberate free fluorine at elevated temperatures.
Polypropylene: Generally rugged and usually resistant to many chemicals solvents. Rugged and often stiffer than other plastics, economical. 180°F -35°F
82°C 0°C
Buna N: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used 190°F -10°F
with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hyrdrocarbons. 88°C -23°C
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
