Page
Section - E35
- 40G
Form 403238
August 2002
MODEL 84275
BARE REEL
SERIES "C"
SPECIFICATIONS
Maximum working pressure 5000 p.s.i.
Material Inlet 1/2 NPT (Female)
Material outlet 1/2 NPT (Female)
Sheave width 10
Sheave diameter 19-1/4
Drum diameter 12-3/4
Overall width 13-1/2
Overall height 22-1/2
Overall depth 21
Maximum hose capacities (Including hang down):
3/8 I.D. Grease hose (SAE 100 R2) 75 ft.
1/2 I.D. Grease hose (SAE 100 R2) 75 ft.
1/2 I.D. Oil hose (SAE 100 R3) 75 ft.
5/8 I.D. Grease hose (SAE 100 R1) 75 ft.
NOTE: Maximum hose capacities are based on SAE
specified hoses. Exceeding these capacities voids warranty.
Refer to DELIVERY HOSE INSTALLATION for proper hose to
reel assembly.
DESCRIPTION
Model 84275 Hose Reel is a spring operated unit designed
to hold and retract up to 75 ft. of 5/8 diameter hose, see hole
capacities chart.
The reel is a heavy duty unitl designed for bus and truck
lubrication or wherever extra heavy duty
construction and longer length delivery hose is required .
The reel can be installed as a single unit or in multiple
configurations.
Reel features include a reel latch that automatically locks at
desired positions as the hose is extended and releases with
a short pull on the hose.
OWNER/OPERATOR
RESPONSIBILITY
It is the owner/operator responsibility to properly use and
maintain this equipment.
The instructions and warnings contained in this manual
shall be read and understood by the owner/operator prior to
operating this equipment.
If an owner/operator does not understand English, the
contents of this manual shall be explained in the owner/
operator native language to assure the owner/operator
comprehends.
It is the owner/operator responsibility to maintain the
legibility of all warning and instruction labels.
The owner/operator shall retain this manual for future
reference to important warnings, operating and
maintenance instructions.
To Next Page
Need help?
General
