Need help?Do you have a question about the Lincoln SKF Centro-Matic and is the answer not in the manual?
General| Type | Centralized Lubrication System |
|---|---|
| System | SKF Centro-Matic |
| Pump Types | Electric, pneumatic, hydraulic |
| Lubricants | Oil, Grease |
| Applications | Industrial machinery, construction equipment |
| Voltage | 12V, 24V, 230V |
| Operation | Automatic or Manual |
| Temperature Range | -25°C to 75°C |
Manufacturer information, compliance standards, and technical file details for the partly completed machinery.
Manufacturer information, UK regulations compliance, and technical file details for the partly completed machinery.
General safety instructions and warnings for operating the equipment safely, including high-pressure fluid hazards.
Defines signal words like DANGER, WARNING, CAUTION, and NOTE used in the manual to indicate hazard levels.
Details the Series 20 pumps, models 84050, 84050MSO, 85460, and 85460MSO, and their capabilities.
Outlines the intended applications and limitations for the pumps, specifying lubricant types and air usage.
Lists key technical specifications such as pump ratio, output per minute, pressure ratings, and container capacity.
Explains how the pump operates automatically when controlled by a system controller and pressure switch.
Describes the function of the mechanical shut-off system to prevent overfilling during the refill process.
Provides detailed physical dimensions and measurements for the 85460MSO model via diagrams.
Step-by-step guide for placing and connecting the unit in its intended location, including air and outlet connections.
Description of the low level kit, its components, and purpose for monitoring lubricant levels.
Instructions for filling the lubricant reservoir using bulk or 5-gallon pail methods.
Procedure for filling the reservoir on MSO-equipped models, including follower and valve interactions.
Details the steps for the operational procedure, including relief valve and quick disconnect handling.
Guidelines for keeping the pump area clean, lubricants clean, and preventing contamination during refills.
Guidance on troubleshooting system issues by referring to specific sections and illustrated parts.
Procedure for servicing the outlet check valve assembly, including disassembly, inspection, and reassembly.
Instructions for servicing the follower wiper or foam for effective container cleaning and lubrication delivery.
Steps for disassembling and reassembling the follower for models without foam, including part identification.
Steps for disassembling and reassembling the follower for MSO models with foam, including part identification.
Detailed steps for removing, disassembling, inspecting, and reassembling the vent valve assembly.
Procedure for inspecting, replacing the o-ring, and reassembling the low level indicator assembly.
Explains the function and set pressure of the safety unloader valve in relieving lubricant pressure.
Refers to manual 404758 for details on automatic mechanical shut-off operation.
Refers to manual 403513 for details on the bare pump assembly.
Illustration showing service parts for the 84050 model, with numbered components.
Illustration showing service parts for the 84050MSO model, with numbered components.
Illustration showing service parts for the 85460 model, with numbered components.
Illustration showing service parts for the 85460MSO model, with numbered components.
Detailed list of service parts, descriptions, quantities, and specific part numbers for various models.
Identifies common operating conditions, their possible causes, and recommended corrective actions for the pump.
Information on where to find warranty details in the General Conditions of Sales online.
To Next Page
