Lincoln SP 170-I User Manual

SP 170-I
OPERATOR’S MANUAL
IM795
March, 2004
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part.
DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT.
And, most
importantly, think before you act
and be careful.
For use with machine Code Numbers
: 10982; 10983
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2004 Lincoln Global Inc.
This manual covers equipment which is no
longer in production by The Lincoln Electric Co.
Specications and availability of optional
features may have changed.

Lincoln SP 170-I Specifications

General

Brand	Lincoln
Model	SP 170-I
Category	Welding System
Language	English

Summary

Safety Precautions

Introduction and General Warnings

Specific Hazard Categories

Details electric shock, arc rays, fumes, gases, fire, and explosion risks.

Cylinder, Electrical, and EMC Safety

Covers cylinder handling, powered equipment safety, and electromagnetic compatibility.

Installation Guide

Technical Specifications and Component ID

Installation Safety and Location

Safety rules for installation and guidance on selecting a suitable location.

Operation Procedures

Overview, Features, and Controls

Welding Process and Settings

Performing a Weld

Step-by-step guide for wire loading, setup, and making a weld.

Maintenance Procedures

Maintenance Safety and Routine Checks

Safety warnings and routine tasks for power source and wire feed compartments.

Gun, Cable, and Liner Maintenance

Component Replacement

Troubleshooting Guide

Troubleshooting Common Problems

Addresses output, feeding, gas flow, and welding stability issues.