Lincoln SP-100T User Manual

SP-100T
OPERATOR’S MANUAL
IM811
September, 2004
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machine Code Number
11028
SP-100T
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2004 Lincoln Global Inc.

Lincoln SP-100T Specifications

General

Brand	Lincoln
Model	SP-100T
Category	Welding System
Language	English

Summary

Safety Precautions

General Safety Warnings

Electric Shock, Arc Ray, and Fume Hazards

Precautions against electric shock, arc ray burns, and hazardous fumes or gases.

Fire, Explosion, and Cylinder Safety

Warnings about fire, explosion risks from sparks, cylinders, and electrical hazards.

Installation Procedures

Gas Connection and Safety

Critical safety warnings regarding cylinder handling, gas buildup, and valve operation.

Operation Guide

Control Settings and Gun Trigger Function

Making a Weld

Comprehensive guide on how to perform a welding operation.

Overload Protection Systems

Application Chart

Suggested Welding Settings

Recommended settings, polarity, and drive roll orientation for various welding applications.

Maintenance and Care

Maintenance Safety Precautions

Critical safety warnings before performing any maintenance tasks.

Routine Maintenance for Welder Components

Gun and Cable Maintenance

Component Replacement Procedures

Step-by-step guides for replacing key components like contact tips and drive rolls.

Liner Replacement Procedure

Troubleshooting Guide

How to Use Troubleshooting Guide

Output Problems Troubleshooting

Guide to diagnose and resolve issues related to the welder's output.

Wire Feed and Gas Flow Troubleshooting

Troubleshooting steps for wire feeding and gas flow issues.

Welding Performance Troubleshooting

Troubleshooting steps for diagnosing and fixing poor welding performance or starting issues.