ThThee hyhydrdrauaulilicc oioill wiwillll flofloww ouout. t. PlPlacacee anan oioill papann
undeunderr the filtthe filter.er.
Lift the overhead guard into the 2ndlockLift the overhead guard into the 2ndlock
position.position.
UsUsee anan exextetensnsioionn toto unundodo ththee filfilteterr hohoususiningg
(3(3)) frfromom ththee bobottttomom leleftft ofof ththee trtrucuck.k.
Remove the filter housing anRemove the filter housing and the upperd the upper
cover.cover.
TaTakeke ououtt ththee filfilteterr ininsesertrt (4(4).).
Check the O-ring on the filter cover, andCheck the O-ring on the filter cover, and
replreplace iface if damadamaged.ged.
InInststallall ththee newnew filfilteterr ininsersert.t.
Screw into the filter housing (3) until itScrew into the filter housing (3) until it
makes contmakes contactact with the O-ring on twith the O-ring on the filterhe filter
cover, and then use a 40Nm torque tocover, and then use a 40Nm torque to
tighten.tighten.
Operating the working Operating the working hydraulic systemhydraulic system,,
chcheckeckingingthetheleleakak resresisistantancece ofof ththee prepressssureure
filter.filter.
CloClosese ththee ovoverherh
eadead guardguardcomcompletpletelyely..
To Next Page
