Need help?Do you have a question about the Linde E18 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Battery voltage | 48 V |
| Load Capacity | 1800 kg |
| Drive Motor | AC |
| Nominal load capacity | 1800 kg |
| Mast Type | Duplex |
| Turning Radius | 1970 mm |
Details the truck's design, features, and available steering axle options.
Covers general safety rules and regulations for operating industrial trucks.
Highlights critical safety precautions, warnings, and dangers to be aware of.
Outlines hazards related to truck use and required actions, training, and regulations.
Explains the function and meaning of the lights and indicators on the control panel.
Provides instructions on how to properly use and affix the seat belt for safety.
Details the step-by-step procedure for starting and preparing the forklift truck for operation.
Explains how to operate the forklift truck using the two-pedal control system.
Describes how to operate the forklift truck using the single-pedal control system.
Details the different braking systems (hydraulic, regenerative) and their operation.
Explains the operation of the lift mast and attachments using a central lever.
Details the operation of the lift mast and attachments using a single lever system.
Explains the functionality and usage of the Linde Forklift Data Management system.
Provides essential information and procedures for operating the forklift truck while carrying loads.
Details the crucial steps and checks to perform before lifting any load.
Provides a step-by-step guide on how to safely pick up a load with the forklift.
Offers guidance and precautions for driving the forklift when it is carrying a load.
Explains the correct procedure for safely placing down a load.
Explains the safe procedures and precautions for lifting the truck using a crane.
Details the procedures to follow when leaving the forklift truck.
Details safety precautions and procedures for maintenance work on the lift mast and front of the truck.
Outlines maintenance tasks to be performed every 500-1000 hours or annually.
Lists the inspection and maintenance tasks required after the initial 1000 operating hours.
Covers maintenance tasks that should be performed as needed based on operational conditions.
Provides instructions and safety precautions for charging the forklift truck's battery.
Details the procedure and safety measures for replacing the forklift truck battery.
Lists essential checks to perform before operating the forklift truck.
Explains how to check the battery's charge level using the indicator unit.
Describes how to inspect the seat belt for condition and proper function.
Details how to check the hydraulic, parking, and electric motor braking systems.
Explains how to check tyre pressure and condition, and lists tyre specifications.
Covers inspection of lift mast components for secure fastening, condition, and function.
Offers guidance on diagnosing and resolving common malfunctions and issues with the forklift.
To Next Page
