EasyManua.ls Logo

Linde E 30-02 - User Manual

Linde E 30-02
96 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
With Electric Motors
336 804 3001 GB
E 20 - 02 / E 25 - 02 / E 30 - 02
E 20/600 - 02 / E 25/600 - 02 / E 30/600 - 02
Operating Instructions
0704
Linde Fork Lift Truck
e336-02/01

Table of Contents

Questions and Answers

  • C
    Connor RollinsAug 10, 2025
    What to do if my Linde Forklifts truck does not start?
    • J
      Jeanette OneillAug 10, 2025
      If your Linde Forklifts truck doesn't start, several issues could be the cause. First, check if the battery is discharged and charge or replace it if necessary. Ensure all electrical connections are tight, especially at the battery terminals, and coat them with non-acidic grease. Verify that the overhead guard is correctly locked. Finally, inspect the fuses and replace any that are blown.
  • K
    Krystal WrightAug 17, 2025
    How to troubleshoot abnormal noise in Linde Forklifts?
    • H
      Haley ChristianAug 17, 2025
      Abnormal noise in your Linde Forklifts can stem from several causes. Start by checking the suction filter for restrictions and clean or replace it. Inspect suction hoses for leaks, and if oil foams, tighten the hose connections. If these steps don't resolve the issue, the hydraulic pump may be damaged, or seals may be faulty, leading to air intake, in which case you should have it inspected by your authorised distributor. Also, ensure you're using the correct oil viscosity and that the oil level in the tank is adequate; change the oil and replenish if needed.
  • B
    Brent CastroAug 26, 2025
    Why is there no or too low pressure in the Linde Forklifts system?
    • S
      Sarah DavisAug 26, 2025
      If you're experiencing no or low pressure in your Linde Forklifts system, several factors could be responsible. Check for pump suction faults, which may be noisy, and change or replenish the oil. Pump failure, pressure valve issues (such as valves not closing or valve seat damage) can also be the cause, and you should have it repaired by distributor’s mechanic. Inspect the pipeline for breaks or leaks, replacing the pipe or tightening connections as necessary. Also, using oil with low viscosity can lead to high leakage losses, so change the oil and use the specified viscosity.
  • D
    dandrewsSep 2, 2025
    What causes the hydraulic oil temperature to be too high in Linde E 30-02?
    • G
      gregory08Sep 2, 2025
      High hydraulic oil temperature in your Linde Forklifts can be caused by pump failure or leaking valves, in which case you should have it repaired by a workshop. Also, check the oil level and replenish if it is too low.

Summary

Foreword

Approved Applications

Details approved uses for Linde lift trucks.

Technical Information

Technical Notes and Truck Takeover

Important notes on product progress and procedures for accepting a new truck.

Technical Data and Descriptions

Provides detailed specifications, diagrams, and descriptions of truck components.

Operation

Basic Operation, Driving, and Controls

Covers driving, steering, braking, and control levers.

Mast and Attachment Operations

Operation of mast functions and attachments using the control lever.

Lighting, Indicators, and Heater

Function of lights, indicators, wipers, and the electric heater.

Safety and Pre-Operation Checks

General Safety and Daily Inspections

Safety rules, fluid handling, pre-operation checks, and daily inspections.

Maintenance

Maintenance Intervals and Procedures

Outlines required maintenance tasks, intervals, and specifications for truck upkeep.

Scheduled Maintenance Tasks (500-1000 hrs)

Routine maintenance checks and lubrication for steering, motors, brakes, and mast.

Scheduled Maintenance Tasks (3000 hrs)

Procedures for major maintenance like hydraulic oil and wheel drive oil changes.

Troubleshooting and Diagrams

Troubleshooting Common Issues

A guide to diagnose and resolve common truck problems with page references.

Electrical and Hydraulic Circuit Diagrams

Schematic diagrams illustrating the truck's electrical and hydraulic systems.

Linde E 30-02 Specifications

General IconGeneral
BrandLinde
ModelE 30-02
CategoryForklifts
LanguageEnglish

Related product manuals