Linde E18 - Linde Forklift Data Management (LFM)

Operation 4
Special equipment
1 2 3
4 5 6
7 8 9
*
0 #
2
1
1
2
3
4
5
6
7
8
9
*
0
#
e3861356
Linde Forklift Data Manage-
ment (LFM)
The input device (1) for Forklift Data Acquisi-
tion (FDE) is mounted on the right-hand bar of
the driver’s protective roof in front of the con-
sole.
1
e3861326
1 2 3
4 5 6
7 8 9
*
0 #
2
Forklift Data Acquisition
The input device has a 12-character keypad
(2). With the standard setting the allocation
of a 5-digit PIN number to the relevant driver
ensures that the forklift truck can only be used
by authorised staff . The vehicle can only be
started after inputting this PIN number and
possibly a state code (depending on the set-
ting).
NOTE
The PIN number can be extended from 5 to 8
digits. Before inputting the PIN number please
check with your fleet manager about the num-
ber of digits for the PIN number and setting of
the vehicle.
State code
NOTE
The code indicates the state of the vehicle.
The following codes are available:
0
= vehicle OK
1
= request service (v
ehicle will not start)
2
= request maintenance (vehicle starts)
3
= problem with driving
4
= problem with liftin
g
Operating Instructions – 386 807 1001 EN – 03/2006 59