EasyManua.ls Logo

Linde E18 - Fuses for Special Equipment

Linde E18
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Servicing 5
Troubleshooting
Fuses for special equipment
Check / replace fuses
NOTE
The plug-in fuses and relays for the special
equipment such as working headlights, wind-
screen wipers, rotating beacon etc. are can
be found in a housing (1) located behind the
driver’s seat between the members of the
driver’s protective roof. The housing cover
must be removed to access the fuses .
e3861308
1
¾ Unscrew the 2 fastening screw
sonthetop
of the housing (1) and remove t
he cover.
¾ Check relevant fuses and replace if neces-
sary.
NOTE
Only genuine Linde spare fuses with a high
voltage rating should be used. Please contact
your authorised dealer.
Operating Instructions 386 807 1001 EN 03/2006 135

Table of Contents

Related product manuals