LoLowewerr ththee foforkrk cacarrrriaiagege toto ititss fufullll exextetentnt..
Open the overhead guard into the 2lockOpen the overhead guard into the 2lock
position.position.
Unscrew the clamp nut (4) on theUnscrew the clamp nut (4) on the
suctionsuction
filtfilter coveer coverr (3).(3).
Use the clamp belt to Use the clamp belt to remove the suctionremove the suction
filter cover.filter cover.
Slowly take out the filter, allowing theSlowly take out the filter, allowing the
hyhydrdrauaulilicc oioill toto flofloww babackck inintoto ththee oioill tatanknk..
Use the hand pump to pump outUse the hand pump to pump out
the hy-the hy-
draulic oil.draulic oil.
Fill up with new hydraulic oil.Fill up with new hydraulic oil.
The capacity of the hydraulic oilThe capacity of the hydraulic oil
tank..................................................istank..................................................is
approximapproximatelyately 11.0litr11.0litreses
Carefully instaCarefully install the new ll the new suctiosuction filter inton filter into
the oil tank.the oil tank.
ClCleaeann anandd papainintt aa ththinin lalayyerer ofof eengngiinene oioill onon
ththee filfilteterr cocoveverr sesealaliningg rr
ing,ing, andand then then insinstaltalll
by hand.by hand.
Use the clamp belt Use the clamp belt to tighten the suctionto tighten the suction
filfilteterr cocoveverr anandd fafaststenen wiwithth ththee boboltlt totorqrqueue..
ChChececkk ththee leleakak reresisiststanancece ofof ththee filfilteter.r.
Take out the air filter (Take out the air filter (
2), and use the2), and use the
dipstick (1) to check tdipstick (1) to check t
he oil lhe oil levelevel. . AddAdd
hydraulic oil as requhydraulic oil as requ
ired, up to the upperired, up to the upper
markmarkinging on ton thehe dipsdipstictick.k.
ReiReinstnstalalll thethe airair filfilteter.r.
CloClosese ththee ovoverherheadead guaguard.rd.
To Next Page
Loading...
