To Next PageTo Next Page
Need help?Do you have a question about the Linde T 20 and is the answer not in the manual?
General| Load Capacity | 2000 kg |
|---|---|
| Drive Type | Electric |
| Operating Voltage | 24 V |
| Battery Voltage | 24 V |
| Travel Speed | 12 km/h |
Comprehensive list of checks before first use.
Essential safety and operational checks before each shift.
Procedure to test the truck's braking performance.
Testing the anti-crush safety feature on the tiller.
Safe procedures for connecting and disconnecting the battery.
Instructions for charging the truck's battery using the integrated charger.
Instructions for operating the truck in forward motion.
Function and operation of the safety reverse button to prevent entrapment.
Control of primary truck functions like braking, lifting, and signaling.
Steps and precautions for safely picking up a load.
Guidelines for safely moving loads, including on slopes.
Steps and precautions for safely placing a load.
Specific checks and maintenance tasks required after initial operation.
Procedure for maintaining battery electrolyte levels with demineralised water.
Method to assess battery charge state via specific gravity measurements.
Inspecting battery electrical connections for integrity and cleanliness.
Procedure for ensuring and adjusting the truck's brake control.
Procedure for inspecting and replacing traction motor brushes.
Procedure for inspecting and replacing pump motor brushes.
Procedure for draining, cleaning, and refilling the hydraulic fluid.
