Linde T20 SP - Page 102

Service Training
Section 6
Page 48
6.4.7 Using the Truck Doctor to set parameters for the multifunction indicator
MENU 1: Programming initialisation
- Open this menu so that the multifunction indicator goes to display mode in programming mode.
MENU 2: Service Options
The service indicator can be Enabled(*) or Disabled
Service indicator Enabled:
The next service visit can be enabled with a given hour meter on a precise date.
- On the screen choose: the hour meter (*) or the date.
- Enter the hour meter or the date of activation.
By the hour meter By the date
The service alarm can be triggered few days or few hours before the service visit.
- In the screen enter: the number of hours or the number of days before activating the visit.
Alarm by the hour meter Alarm by the date
Delete service reminder alarm:
- Carry out programming of next service visit.
TRUCKDOCTOR
Program
Example:
Next service visit activated at 1,050 hours
(*) By default: at 500 hours
Example:
Next service visit activated on 200802
(20 August 2002)
Example:
The service alarm will ring 20 hours before the
service
(*) By default: 50 hours before
Example:
The service alarm will ring 10 days before the
service
(*) By default: 7 days before
(*) By default
https://www.besttruckmanuals.com/