Section 6
Page 41
Service Training
6.4 MULTIFUNCTION INDICATOR TlN Version 1
(Not linked to the truck Can-Bus)
6.4.1 Description
CHARACTERISTICS
General protection: IP 66 Frontal and
IP 54 lateral and rear
Nominal power supply: 24 V
DESCRIPTION
Raised instead of and in place of the ILDB on the speed control plate cover, the TNL multifunction indicator
has the following functions:
- Battery discharge indicator with low level alarm and lifting cut off
Important: - Full load: 100% displayed
- Discharged: 0% displayed corresponds to the limit of 80% of battery discharge
(recharge mandatory)
- Date, time
- Truck operation hours (hour meter)
- Display of information messages and tips
- Wheel position indicator
- Service interval indicator with service alarm to be provided
- Truck operator presence indicator
- Alarms with messages indicators
1
2
3
4
5
6
Figure 1
1 Alphanumeric display
2 Control buttons
3 Accumulator cap
4 Fork rod
5 Connector (22 channels)
6 Control indicators
https://www.besttruckmanuals.com/
To Next Page
Loading...
