Lindner URRACO 75 D - Radio Remote Control

URRACO 75 D 

 O PERATION OF THE S HREDDER
Managing director
LINDNER
Mobile Shredder GmbH
Industriestrasse 1A
D-99820 Hörselberg / Eisenach
Service hotline:
+49 (0) 36920 - 7269 - 600
service@l-ms.de
Manuel Lindner
Gerhard Buhl
Walter Geiger
Page - 16 - of - 33 -
1.5.-5 Radio Remote Control
The remote control system consists of the actual remote control (transmitter of the remote
control) and the receiver which is installed on the backside of the operating panel.
Switch off the remote control immediately when a fault occurs. Switch the
transmitter off using the (Emergency stop) button. Disconnect the receiver
connecting cable from the connection socket (terminal) of the plant to be
controlled.
 Transmitter of the remote control
Status indicators
Hopper 1 up
Automatic on
Hopper 2 up
Conveyor belt up
reverse
Hopper 2 down
Conveyor belt
Automatic
-
off
Emergency stop
Magnet up
Magnet down
LED
Battery /
Radio connection